Products


Load Conveyor for Trucks & Trailers

 

Conveyor belt mounts on pickup trucks and trailers. Hand crank pulls drag-sheet. Two models: 2200 and 3000 pound models. Easy to install or remove by means of two straps. 2200 model has plastic bearings, 3000 all steel bearings and longer crank. Dragsheet woven polyester. 12 month warranty. Replacement parts available.


What size fits your truck or trailer

 

oad conveyor units have adjustable brackets that belt onto the tops of tailgates, so it is the width of the tailgate (left to right, or Driver Side to Passenger Side) that is important in determining which Load conveyor models will fit your truck. Bed length and type of cab are not important in determining which Load conveyor model to purchase. Full-Size (fleetside) tailgate widths range from 61" - 67" and accommodate either the 2200 or 3000. Mid-Size (fleetside) tailgate widths range from 52" - 57" and accommodate 2200M. Step-Side (flair-side or non-fleetside) tailgate widths range 44" - 52" and accommodate only the Mid-Size unit 2200M. Both Full-Size and Mid-Size step-sides take the 2200M. Some, but not all, F-150 Super Crews, 2008 and older, (the 2009 and newer Super Crews have regular full-size tailgates) take the 2200M because of a tapered tailgate of 52". For Mid-Size step-sides (Ford Ranger, Chevy S-10, etc.), dragsheet widths need to be trimmed 4"-5" inches in order to fit the narrow tailgates.


2200 Universal Full-Size Standard

 

Fits all Full-Size pickups (except Step-Sides), including 1/2-ton, 3/4-ton and 1-ton • Chevy Silverado • Dodge Ram • Ford F-Series • GMC Sierra • Nissan Titan • Toyota T100 and Tundra Best model for 1/2-ton trucks. Also recommended for light-duty on 3/4- and 1-ton trucks. Does not fit some 2008 and older F-150 Super Crews. Please measure width of your Super Crew tailgate to be sure. 61" - 67" wide is full-size and 52" - 57" is mid-size. EXCEPTIONS: The new "extra-wide" brackets have arrived! The new brackets are designed to fit any new 1/2-ton (extra-wide brackets are not necessary for 3/4-ton and 1-ton trucks) with an extra-wide tailgate and/or an extra-wide tailgate cap (spoiler). The new brackets open to maximum 6 inches wide; our regular brackets open to 3.5 inches maximum. Following are full-size trucks that "probably" need the extra-wide bracketing: 2008 & newer Chevy/GMC 1500 (Silverado & Sierra), 2008 & newer Dodge Ram 1500, and "some" 2009 & newer Ford F-150s (not all new F-150s have wide tailgates). Newer model truck owners should measure their own tailgate widths, on the far-right and far-left sides of the tailgate, or tailgate cap, where the load conveyor unit attaches. If wider than 3.5", then the new wide brackets are needed. The extra-wide brackets are special order only. The extra-wide brackets are free to customers with new load conveyors and $15 + $8 shipping and handling (continental U.S. for $8 shipping) for customers with used load conveyors.

Load Conveyor Photos application

2200M Universal Mid-Size/Compact Standard

 

Fits all Mid-Size, Compact and all Step-Sides • Chevy S-10 & Colorado • Dodge Dakota • Ford Ranger & F-150 Super Crew • GMC Sonoma & Canyon • Honda Ridgeline • Isuzu • Mazda • Mitsubishi Raider • Nissan Frontier • Toyota Tacoma Best model for all Mid-Size trucks. Also best model for all Step-Sides including Full-Size and Mid-Size/Compact Step-Sides. Need to trim dragsheet width (from 42" wide to approx. 37") on mid-size/compact step-sides in order to make room for brackets to attach to narrow tailgate.

Load Conveyor Photos application

3000 Universal Full-Size Heavy-Duty. Professional Model, Commercial-Grade.

 

Universal Full-Size Heavy-Duty. Professional Model, Commercial-Grade. Fits all Full-Size pickups (except Step-Sides and Toyota 2006 and older), including 1/2-ton, 3/4-ton and 1-ton • Chevy Silverado • Dodge Ram • Ford F-Series • GMC Sierra • Nissan Titan • Tundra 2007 & newer Best model for heavy use on all Full-Size trucks, especially 3/4- and 1-ton trucks. Fits all Full-Size trucks except Step-Sides, some 2008 and older F-150 Super Crews (see explanation above under 2200M) and Toyota T100 & Tundra 2006 & older. The 3000 is the most suitable Load cinveyor for trailer and flat-bed application, although modification by consumer may be required. EXCEPTIONS: The new "extra-wide" brackets have arrived! The new brackets are designed to fit any new 1/2-ton (extra-wide brackets are not necessary for 3/4-ton and 1-ton trucks) with an extra-wide tailgate and/or an extra-wide tailgate cap (spoiler). The new brackets open to maximum 6 inches wide; our regular brackets open to 3.5 inches maximum. Following are full-size trucks that "probably" need the extra-wide bracketing: 2008 & newer Chevy/GMC 1500 (Silverado & Sierra), 2008 & newer Dodge Ram 1500, and "some" 2009 & newer Ford F-150s (not all new F-150s have wide tailgates). Newer model truck owners should measure their own tailgate widths, on the far-right and far-left sides of the tailgate, or tailgate cap, where the load conveyor unit attaches. If wider than 3.5", then the new wide brackets are needed. The extra-wide brackets are special order only. The extra-wide brackets are free to customers with new load conveyors and $15 + $8 shipping and handling (continental U.S. for $8 shipping) for customers with used load conveyors.

Tailgate width and thickness.
Delivery address & telephone
Tailgate width and thickness.
Delivery address & telephone

Load Conveyor Photos application




Home
Business Profile
Biography and Resume
Classes
Pruning
Design Portfolio
Design Process
Public Service
Press Clips
Links
Contact Peter
Products
e-mail me